HDMI Switch 3x1 4K Pigtail 0.5m
Produktinformation til HDMI Switch 3x1 4K Pigtail 0.5m
This switching function is not performed only by pressing the buttons on the device, but also through an intelligent function.
The built-in cable (pigtail) not only reduces costs but also saves users time. Route high definition video (with multiple resolutions up to 4Kx2K at 30Hz) and digital audio from one of the three high definition video sources, also compatible with HD-DVD, SKY-STB, PS3, XBOX, etc. The output sends high definition audio/video signals to a high definition monitor.
Features
Multifunction switching: intelligent or mechanical
Supports HDMI 1.4b
Supports maximum video resolution up to 4Kx2K @ 30Hz
Supports bandwidth of 340MHz / 3.4 Gbps per channel (10.2 Gbps all channels)
Supports 12bit deep color per channel (36bit all channels)
HDCP pass-through
Supports uncompressed audio like LPCM
Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
Input and output signal
5volts p-p DDC signal input (TTL)
Maximum Single Link range 4Kx2K @ 30Hz
HDTV 1.4b video output
Operating frequency
Video frequency range 50 / 60Hz
3.4Gbps / 340MHz video bandwidth
Resolution (HDTV)
Interlaced (50 & 60Hz) 4Kx2K
Progressive (50 & 60Hz) 4Kx2K
Environmental characteristics
Operating temperature from 0 °C to + 70 °C
Operating humidity from 10% to 85% (without condensation)
Storage temperature from 5% to 90% RH (without condensation)
Package contents
HDMI ™ 3x1 Pigtail switch
User Manual
| Suitable for 19 inch mounting: | False |
|---|---|
| Video norm: | Colour PAL |
Tekniske egenskaber
| Suitable for 19 inch mounting: | False |
|---|---|
| Video norm: | Colour PAL |
Produktinformation til HDMI Switch 3x1 4K Pigtail 0.5m
This switching function is not performed only by pressing the buttons on the device, but also through an intelligent function.
The built-in cable (pigtail) not only reduces costs but also saves users time. Route high definition video (with multiple resolutions up to 4Kx2K at 30Hz) and digital audio from one of the three high definition video sources, also compatible with HD-DVD, SKY-STB, PS3, XBOX, etc. The output sends high definition audio/video signals to a high definition monitor.
Features
Multifunction switching: intelligent or mechanical
Supports HDMI 1.4b
Supports maximum video resolution up to 4Kx2K @ 30Hz
Supports bandwidth of 340MHz / 3.4 Gbps per channel (10.2 Gbps all channels)
Supports 12bit deep color per channel (36bit all channels)
HDCP pass-through
Supports uncompressed audio like LPCM
Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
Input and output signal
5volts p-p DDC signal input (TTL)
Maximum Single Link range 4Kx2K @ 30Hz
HDTV 1.4b video output
Operating frequency
Video frequency range 50 / 60Hz
3.4Gbps / 340MHz video bandwidth
Resolution (HDTV)
Interlaced (50 & 60Hz) 4Kx2K
Progressive (50 & 60Hz) 4Kx2K
Environmental characteristics
Operating temperature from 0 °C to + 70 °C
Operating humidity from 10% to 85% (without condensation)
Storage temperature from 5% to 90% RH (without condensation)
Package contents
HDMI ™ 3x1 Pigtail switch
User Manual
| Suitable for 19 inch mounting: | False |
|---|---|
| Video norm: | Colour PAL |
| Suitable for 19 inch mounting: | False |
|---|---|
| Video norm: | Colour PAL |
Sikkerhedsanvisninger
Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse. Important safety information to prevent accidents and damage during installation: Hazard: If the raised floor is used incorrectly, it may break. Action: Avoid walking on the raised floor unless the correct loads and load specifications are taken into account. Incorrect loading Hazard: Incorrect loading can lead to instability and damage. Action: Ensure that the load is even and prescribed according to the manufacturer's instructions. Enclosure falls due to weight being exceeded Hazard: Exceeding the maximum weight limit can destabilize the enclosure. Action: Check the maximum permissible load of the enclosure and ensure that this is not exceeded. Falling components due to inadequate fastening Hazard: Inadequately fastened components can fall and cause injury. Action: Ensure that all parts are properly and securely assembled. Housing parts breaking out due to incorrect loading Danger: Inadmissible loading leads to material damage and possible housing parts breaking out. Action: Ensure that the load is distributed correctly and that the recommended load is used. Risk of tipping due to uneven floor Danger: An uneven floor can cause the cabinet or device to tip over. Action: Make sure that the surface is level and stable to avoid the risk of tipping. Risk of tipping due to insufficient load-bearing capacity of the surface Danger: Insufficient load-bearing capacity of the surface can encourage the cabinet to tip over. Action: Check the load-bearing capacity of the surface before installation and ensure that it can safely support the weight. Cabinet can tip over if heavy server unit is pulled forward Danger: Pulling heavy server units forward can cause the cabinet to tip over. Action: Always secure cabinets and server units with suitable brackets and seek assistance when handling heavy equipment. Risk of tipping over with heavy cooling unit without safety measures Hazard: Improper fastening of cooling units to external brackets can cause the cabinet or device to tip over. Action: Secure cooling units with suitable devices to prevent tipping. Side walls fall off - sash lock not used correctly Hazard: Incorrectly used sash locks can cause the side walls of the cabinet to fall off. Action: Regularly check that all sash locks are correctly and securely fitted. Load capacity not provided Hazard: An insufficient load capacity can destabilise the system. Action: Before installation, check the load capacity information and ensure that the base and the shelves are sufficiently stable. Inadequate fastening when fitting accessories Hazard: Loosely fitted accessories can fall down dangerously. Action: Fasten all accessories carefully and regularly check them for strength. Insufficient wall statics - housing falls down Danger: Insufficient wall statics can cause the housing to fall down. Action: Before installation, make sure that the wall has sufficient static load-bearing capacity and that the housing can be installed safely. Injury from falling attachments Danger: Insufficiently secured attachments can fall down and cause injuries. Action: Make sure that all attachments are correctly secured and check them regularly.
Producentangivelse
IC Intracom Italia S.p.A.
Viale Europa, 33
33077 Sacile - Pordenone
info@techly.com
https://www.techly.com
