Indkøbskurv

Extension Cable C14 180° - C13 180° with IEC Lock, black

Extension Cable C14 180° - C13 180°, Black, 0.5 m, 3 x 1.00 mm², IEC Lock
Varenummer: EK601SW.0,5
EAN-nr.: 5055112839289
Forudbestil det ønskede antal nu, eller få besked, når det er tilgængeligt:

Giv mig besked, når produktet er på lager igen.

Produktinformation til Extension Cable C14 180° - C13 180°, Black, 0.5 m, 3 x 1.00 mm², IEC Lock

With „IEC Lock“: prevents accidentally removing of the C13 jack from devices
After connecting, the C13 jack only can be released after sliding back the red latch
10 A / 250 V VDE tested (optional: orange, blue, grey, white)

Tekniske egenskaber

Colour outer sheath: black
Connection 1: Cold device plug (IEC 60320)
Connection 2: Cold device plug straight, female
Halogen free: No
Jacket material: Polyvinylchlorid (PVC)
Nominal voltage: 250 V
Number of cores: 3
Oil resistant (acc. EN 60811-2-1): False
Oil resistant (according to EN 60811-404): False
Protective conductor: True
Spiralized cable: False
With cord switch: False

Variants

ON Label Colour outer sheath Length Degree of protection Nominal cross section conductor Outer diameter approx.
EK601SW.0,5 Extension Cable C14 180° - C13 180°, Black, 0.5 m, 3 x 1.00 mm², IEC Lock black 0.5 m IP20 1.00 mm² 7.1 mm
EK601SW.1 Extension Cable C14 180° - C13 180°, Black, 1.0 m, 3 x 1.00 mm², IEC Lock black 1.0 m IP20 1.00 mm² 7.1 mm
EK601SW.1,5 Extension Cable C14 180° - C13 180°, Black, 1.5 m, 3 x 1.00 mm², IEC Lock black 1.5 m IP20 1.00 mm² 7.1 mm
EK601SW.2 Extension Cable C14 180° - C13 180°, Black, 2.0 m, 3 x 1.00 mm², IEC Lock black 2.0 m IP20 1.00 mm² 7.1 mm
EK601SW.3 Extension Cable C14 180° - C13 180°, Black, 3.0 m, 3 x 1.00 mm², IEC Lock black 3.0 m IP20 1.00 mm² 7.1 mm

Sikkerhedsanvisninger


Do not block any ventilation openings to prevent components from overheating. Do not operate the appliance beyond the permissible connected loads to prevent overloading and excessive heat generation. Ensure that the device does not overheat during operation. Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse.

Producentangivelse


EFB-Elektronik GmbH   
Striegauer Straße 1   
33719 Bielefeld   
info@efb-elektronik.de    
https://www.efb-elektronik.de/kontakt