LTC MINI TAGS, small hook and loop straps with tags
Produktinformation til LTC MINI TAGS small hook and loop straps with tags set of 10 pcs yellow/blue/red
Thanks to their practical nylon fastening straps, the cable flags are also suitable for the bundling of thin cables.
Tekniske egenskaber
| Band closure: | Hook-and-loop fastener |
|---|---|
| Fluorescent: | False |
| Material: | Plastic |
| Model: | Hook-and-loop fastener tape |
| Solvable fastener: | True |
| Text strip: | Distant from bundle |
Varianten
| Art. Nr. | Bezeichnung | Color | Length belt/tape/tie | Band width | |
|---|---|---|---|---|---|
| LTC-2510 | LTC MINI TAGS small hook and loop straps with tags set of 10 pcs black | black | 90 mm | 12 mm | |
| LTC-2520 | LTC MINI TAGS small hook and loop straps with tags set of 10 pcs white | white | 90 mm | 12 mm | |
| LTC-2530 | LTC MINI TAGS small hook and loop straps with tags set of 10 pcs yellow/blue/red | yellow/blue/red | 90 mm | 12 mm |
Sikkerhedsanvisninger
Important safety information to prevent accidents and damage during installation: Hazard: If the raised floor is used incorrectly, it may break. Action: Avoid walking on the raised floor unless the correct loads and load specifications are taken into account. Incorrect loading Hazard: Incorrect loading can lead to instability and damage. Action: Ensure that the load is even and prescribed according to the manufacturer's instructions. Enclosure falls due to weight being exceeded Hazard: Exceeding the maximum weight limit can destabilize the enclosure. Action: Check the maximum permissible load of the enclosure and ensure that this is not exceeded. Falling components due to inadequate fastening Hazard: Inadequately fastened components can fall and cause injury. Action: Ensure that all parts are properly and securely assembled. Housing parts breaking out due to incorrect loading Danger: Inadmissible loading leads to material damage and possible housing parts breaking out. Action: Ensure that the load is distributed correctly and that the recommended load is used. Risk of tipping due to uneven floor Danger: An uneven floor can cause the cabinet or device to tip over. Action: Make sure that the surface is level and stable to avoid the risk of tipping. Risk of tipping due to insufficient load-bearing capacity of the surface Danger: Insufficient load-bearing capacity of the surface can encourage the cabinet to tip over. Action: Check the load-bearing capacity of the surface before installation and ensure that it can safely support the weight. Cabinet can tip over if heavy server unit is pulled forward Danger: Pulling heavy server units forward can cause the cabinet to tip over. Action: Always secure cabinets and server units with suitable brackets and seek assistance when handling heavy equipment. Risk of tipping over with heavy cooling unit without safety measures Hazard: Improper fastening of cooling units to external brackets can cause the cabinet or device to tip over. Action: Secure cooling units with suitable devices to prevent tipping. Side walls fall off - sash lock not used correctly Hazard: Incorrectly used sash locks can cause the side walls of the cabinet to fall off. Action: Regularly check that all sash locks are correctly and securely fitted. Load capacity not provided Hazard: An insufficient load capacity can destabilise the system. Action: Before installation, check the load capacity information and ensure that the base and the shelves are sufficiently stable. Inadequate fastening when fitting accessories Hazard: Loosely fitted accessories can fall down dangerously. Action: Fasten all accessories carefully and regularly check them for strength. Insufficient wall statics - housing falls down Danger: Insufficient wall statics can cause the housing to fall down. Action: Before installation, make sure that the wall has sufficient static load-bearing capacity and that the housing can be installed safely. Injury from falling attachments Danger: Insufficiently secured attachments can fall down and cause injuries. Action: Make sure that all attachments are correctly secured and check them regularly.
Producentangivelse
Label-the-cable GmbH & Co. KG
Pfingstrosenstraße 9
81377 München
order@label-the-cable.com
https://www.label-the-cable.com
