LTC WALL STRAPS, self-adhesive hook and loop cable holders
Produktinformation til LTC WALL STRAPS Selbstklebende Klettkabelhalter,50 Stück Set schwarz
LTC WALL STRAPS are extremely durable and can also be used for outdoor purposes in summer and winter. When applying outside, the surface should not be too cold, so that the adhesive properties can achieve their full effect.
The LTC WALL STRAPS are easy to remove and leave no unsightly marks. Note that due to their strong adhesiveness of the cable holders, wallpaper or walls with multiple coats of paint can be affected.
Tekniske egenskaber
| Band closure: | Hook-and-loop fastener |
|---|---|
| Fluorescent: | False |
| Material: | Plastic |
| Model: | Hook-and-loop fastener tape |
| Solvable fastener: | True |
| Text strip: | without |
| Type of fastening: | Adhesive |
Varianten
| Art. Nr. | Bezeichnung | Color | Band width | Length belt/tape/tie | |
|---|---|---|---|---|---|
| LTC-3110 | LTC WALL STRAPS, self-adhesive hook and loop cable holders set of 10 pcs black | black | 28 mm | 90 mm | |
| LTC-3120 | LTC WALL STRAPS, self-adhesive hook and loop cable holders set of 10 pcs white | white | 28 mm | 90 mm | |
| LTC-PRO-3110 | LTC WALL STRAPS Selbstklebende Klettkabelhalter,50 Stück Set schwarz | black | 28 mm | 90 mm | |
| LTC-PRO-3120 | LTC WALL STRAPS Selbstklebende Klettkabelhalter,50 Stück Set weiß | white | 28 mm | 90 mm |
Sikkerhedsanvisninger
Important safety information to prevent accidents and damage during installation: Hazard: If the raised floor is used incorrectly, it may break. Action: Avoid walking on the raised floor unless the correct loads and load specifications are taken into account. Incorrect loading Hazard: Incorrect loading can lead to instability and damage. Action: Ensure that the load is even and prescribed according to the manufacturer's instructions. Enclosure falls due to weight being exceeded Hazard: Exceeding the maximum weight limit can destabilize the enclosure. Action: Check the maximum permissible load of the enclosure and ensure that this is not exceeded. Falling components due to inadequate fastening Hazard: Inadequately fastened components can fall and cause injury. Action: Ensure that all parts are properly and securely assembled. Housing parts breaking out due to incorrect loading Danger: Inadmissible loading leads to material damage and possible housing parts breaking out. Action: Ensure that the load is distributed correctly and that the recommended load is used. Risk of tipping due to uneven floor Danger: An uneven floor can cause the cabinet or device to tip over. Action: Make sure that the surface is level and stable to avoid the risk of tipping. Risk of tipping due to insufficient load-bearing capacity of the surface Danger: Insufficient load-bearing capacity of the surface can encourage the cabinet to tip over. Action: Check the load-bearing capacity of the surface before installation and ensure that it can safely support the weight. Cabinet can tip over if heavy server unit is pulled forward Danger: Pulling heavy server units forward can cause the cabinet to tip over. Action: Always secure cabinets and server units with suitable brackets and seek assistance when handling heavy equipment. Risk of tipping over with heavy cooling unit without safety measures Hazard: Improper fastening of cooling units to external brackets can cause the cabinet or device to tip over. Action: Secure cooling units with suitable devices to prevent tipping. Side walls fall off - sash lock not used correctly Hazard: Incorrectly used sash locks can cause the side walls of the cabinet to fall off. Action: Regularly check that all sash locks are correctly and securely fitted. Load capacity not provided Hazard: An insufficient load capacity can destabilise the system. Action: Before installation, check the load capacity information and ensure that the base and the shelves are sufficiently stable. Inadequate fastening when fitting accessories Hazard: Loosely fitted accessories can fall down dangerously. Action: Fasten all accessories carefully and regularly check them for strength. Insufficient wall statics - housing falls down Danger: Insufficient wall statics can cause the housing to fall down. Action: Before installation, make sure that the wall has sufficient static load-bearing capacity and that the housing can be installed safely. Injury from falling attachments Danger: Insufficiently secured attachments can fall down and cause injuries. Action: Make sure that all attachments are correctly secured and check them regularly.
Producentangivelse
Label-the-cable GmbH & Co. KG
Pfingstrosenstraße 9
81377 München
order@label-the-cable.com
https://www.label-the-cable.com
