Indkøbskurv

Warm Device Extension C14 180° - C15 180°

Warm Device Extension C14 180° - C15 180°, Black, 1 m, 3 x 1.00 mm²
Varenummer: EK585.1V2
EAN-nr.: 4049759295189
Forudbestil det ønskede antal nu, eller få besked, når det er tilgængeligt:
Piece

Giv mig besked, når produktet er på lager igen.

Produktinformation til Warm Device Extension C14 180° - C15 180°, Black, 1 m, 3 x 1.00 mm²

Plug IEC60320/C14 to jack IEC60320/C15
10 A / 250 V VDE tested
Cable H50RN-F 3G(rubber cable)
Colour black

Tekniske egenskaber

Colour outer sheath: black
Connection 1: Cold device plug (IEC 60320)
Connection 2: Hot device plug, female
Halogen free: False
Jacket material: rubber
Nominal voltage: 250 V
Number of cores: 3
Oil resistant (acc. EN 60811-2-1): False
Oil resistant (according to EN 60811-404): False
Protective conductor: True
Spiralized cable: False
Temperature resistance: -35 70 °C
With cord switch: False

Variants

ON Label Colour outer sheath Nominal current With protective conductor Degree of protection Nominal voltage Length Nominal cross section conductor Outer diameter approx.
EK585.1V2 Warm Device Extension C14 180° - C15 180°, Black, 1 m, 3 x 1.00 mm² black 10 A Ja IP20 – 250 V 1.0 m 1.00 mm² 7.3 mm
EK585.2V2 Warm Device Extension C14 180° - C15 180°, Black, 2 m, 3 x 1.00 mm² black 10 A Ja IP20 – 250 V 2.0 m 1.00 mm² 7.3 mm
EK585.3V2 Warm Device Extension C14 180° - C15 180°, Black, 3 m, 3 x 1.00 mm² black 10 A Ja IP20 – 250 V 3.0 m 1.00 mm² 7.3 mm

Sikkerhedsanvisninger


Do not block any ventilation openings to prevent components from overheating. Do not operate the appliance beyond the permissible connected loads to prevent overloading and excessive heat generation. Ensure that the device does not overheat during operation. Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse.

Producentangivelse


EFB-Elektronik GmbH  
Striegauer Straße 1  
33719 Bielefeld  
info@efb-elektronik.de   
https://www.efb-elektronik.de/kontakt