FO Splice Closure Outdoor 3M
FO splice closure Outdoor 3M medium inline closure
Varenummer:
83200.1
EAN nr.:
4049759073848
Produktinformation til FO splice closure Outdoor 3M medium inline closure
The closure was designed and developed on the basis of the proven 3M sealing technology. It consists of moulded plastic parts and Mastic sealing material. The wedge-slide closure and two screws allow the sleeve to be closed easily and quickly. The closure mechanism of the sleeve allows for short installation times and easy opening and re-closing. No special tools are required to open and close the sleeve.
Features
Size: 39.9 cm x 17.5 cm x 10.7 cm
Capacity of up to 48 single fibers (e.g. 4x splice cassette 53100.200)/ 100 copper DA
Split cable entries
Also mountable on an uncut cable
4 cable entries (2 on each side) for cable diameters from 10 to 25.4 mm
Splice protection versions supported: Shrink splice protection, Crimp splice protection, Fiberlok
Proven sealing technology
Wedge slide closure
Temperature resistant from -40°C up to 60°C
Earth-able
Features
Size: 39.9 cm x 17.5 cm x 10.7 cm
Capacity of up to 48 single fibers (e.g. 4x splice cassette 53100.200)/ 100 copper DA
Split cable entries
Also mountable on an uncut cable
4 cable entries (2 on each side) for cable diameters from 10 to 25.4 mm
Splice protection versions supported: Shrink splice protection, Crimp splice protection, Fiberlok
Proven sealing technology
Wedge slide closure
Temperature resistant from -40°C up to 60°C
Earth-able
| Air Pressure: | 40 kPa, 2000 N/10 cm for 1 minute. No leakage. |
|---|---|
| Cable Diameter: | 10 – 25.4 mm |
| Cable glands: | 4 |
| Colour: | Black |
| Degree of protection: | IP68 |
| Design: | Inline |
| Dimension (LxBxH): | 399x175x107 mm |
| Direct Burial: | True |
| Humidity: | 100 kPa at room temperature for 5 minutes. No damage to the splice connections is visible. No leaks. |
| In-/Outputs: | 4 |
| Material: | Plastic |
| Number of TPUs: | 4 |
| Operating Temperature: | -40 – 60 °C |
| Scope of delivery: | 1x sleeve without splice cassette |
| Sealing Type: | Mastic |
| Separated compartments: | True |
| Splice Cassette: | without cassette |
| Splice Cassettes (Number): | 4 |
| Splice Holder: | without |
| Splice protection: | Both (the appropriate splicing comb must be chosen) |
| Suitable for number of fibres: | 48 |
| Tensile stress / compression: | 55 |
| Type of closure: | Junction closure |
| UV resistant: | True |
Tekniske egenskaber
| Air Pressure: | 40 kPa, 2000 N/10 cm for 1 minute. No leakage. |
|---|---|
| Cable Diameter: | 10 – 25.4 mm |
| Cable glands: | 4 |
| Colour: | Black |
| Degree of protection: | IP68 |
| Design: | Inline |
| Dimension (LxBxH): | 399x175x107 mm |
| Direct Burial: | True |
| Humidity: | 100 kPa at room temperature for 5 minutes. No damage to the splice connections is visible. No leaks. |
| In-/Outputs: | 4 |
| Material: | Plastic |
| Number of TPUs: | 4 |
| Operating Temperature: | -40 – 60 °C |
| Scope of delivery: | 1x sleeve without splice cassette |
| Sealing Type: | Mastic |
| Separated compartments: | True |
| Splice Cassette: | without cassette |
| Splice Cassettes (Number): | 4 |
| Splice Holder: | without |
| Splice protection: | Both (the appropriate splicing comb must be chosen) |
| Suitable for number of fibres: | 48 |
| Tensile stress / compression: | 55 |
| Type of closure: | Junction closure |
| UV resistant: | True |
Produktinformation til FO splice closure Outdoor 3M medium inline closure
The closure was designed and developed on the basis of the proven 3M sealing technology. It consists of moulded plastic parts and Mastic sealing material. The wedge-slide closure and two screws allow the sleeve to be closed easily and quickly. The closure mechanism of the sleeve allows for short installation times and easy opening and re-closing. No special tools are required to open and close the sleeve.
Features
Size: 39.9 cm x 17.5 cm x 10.7 cm
Capacity of up to 48 single fibers (e.g. 4x splice cassette 53100.200)/ 100 copper DA
Split cable entries
Also mountable on an uncut cable
4 cable entries (2 on each side) for cable diameters from 10 to 25.4 mm
Splice protection versions supported: Shrink splice protection, Crimp splice protection, Fiberlok
Proven sealing technology
Wedge slide closure
Temperature resistant from -40°C up to 60°C
Earth-able
Features
Size: 39.9 cm x 17.5 cm x 10.7 cm
Capacity of up to 48 single fibers (e.g. 4x splice cassette 53100.200)/ 100 copper DA
Split cable entries
Also mountable on an uncut cable
4 cable entries (2 on each side) for cable diameters from 10 to 25.4 mm
Splice protection versions supported: Shrink splice protection, Crimp splice protection, Fiberlok
Proven sealing technology
Wedge slide closure
Temperature resistant from -40°C up to 60°C
Earth-able
| Air Pressure: | 40 kPa, 2000 N/10 cm for 1 minute. No leakage. |
|---|---|
| Cable Diameter: | 10 – 25.4 mm |
| Cable glands: | 4 |
| Colour: | Black |
| Degree of protection: | IP68 |
| Design: | Inline |
| Dimension (LxBxH): | 399x175x107 mm |
| Direct Burial: | True |
| Humidity: | 100 kPa at room temperature for 5 minutes. No damage to the splice connections is visible. No leaks. |
| In-/Outputs: | 4 |
| Material: | Plastic |
| Number of TPUs: | 4 |
| Operating Temperature: | -40 – 60 °C |
| Scope of delivery: | 1x sleeve without splice cassette |
| Sealing Type: | Mastic |
| Separated compartments: | True |
| Splice Cassette: | without cassette |
| Splice Cassettes (Number): | 4 |
| Splice Holder: | without |
| Splice protection: | Both (the appropriate splicing comb must be chosen) |
| Suitable for number of fibres: | 48 |
| Tensile stress / compression: | 55 |
| Type of closure: | Junction closure |
| UV resistant: | True |
| Air Pressure: | 40 kPa, 2000 N/10 cm for 1 minute. No leakage. |
|---|---|
| Cable Diameter: | 10 – 25.4 mm |
| Cable glands: | 4 |
| Colour: | Black |
| Degree of protection: | IP68 |
| Design: | Inline |
| Dimension (LxBxH): | 399x175x107 mm |
| Direct Burial: | True |
| Humidity: | 100 kPa at room temperature for 5 minutes. No damage to the splice connections is visible. No leaks. |
| In-/Outputs: | 4 |
| Material: | Plastic |
| Number of TPUs: | 4 |
| Operating Temperature: | -40 – 60 °C |
| Scope of delivery: | 1x sleeve without splice cassette |
| Sealing Type: | Mastic |
| Separated compartments: | True |
| Splice Cassette: | without cassette |
| Splice Cassettes (Number): | 4 |
| Splice Holder: | without |
| Splice protection: | Both (the appropriate splicing comb must be chosen) |
| Suitable for number of fibres: | 48 |
| Tensile stress / compression: | 55 |
| Type of closure: | Junction closure |
| UV resistant: | True |
Producentangivelse
EFB-Elektronik GmbH
Striegauer Straße 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de/kontakt
Spring produktgalleriet over
accessory
Art. nr. 53100.3
Crimp splice protector for arc splices, (min. PPU 15/ package 150pcs)
Model:
crimp splice protection
Art. nr. 53100.8
Splice holder for 6 x arc splices with shrink tube, black
Suitable for:
Thermo splice protection
